Edge-Core ECS4120 Series

Chapter 27 | OAM Commands
– 820 –
Example
Console#clear efm oam counters
Console#
Related Commands
show efm oam counters interface (822)
clear efm oam
event-log
This command clears all entries from the OAM event log for the specified port.
Syntax
clear efm oam event-log [interface-list]
unit - Unit identifier. (Range: 1)
port - Port number or list of ports. To enter a list, separate nonconsecutive
port identifiers with a comma and no spaces; use a hyphen to designate a
range of ports. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#clear efm oam event-log
Console#
efm oam
remote-loopback
This command starts or stops OAM loopback test mode to the attached CPE.
Syntax
efm oam remote-loopback {start | stop} interface
start - Starts remote loopback test mode.
stop - Stops remote loopback test mode.
interface - unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
Default Setting
None
Command Mode
Privileged Exec