Chapter 23
| Quality of Service Commands
– 637 –
Default Setting
Displays all policy maps and all classes.
Command Mode
Privileged Exec
Example
Console#show policy-map
Policy Map rd-policy
Description:
class rd-class
set phb 3
Console#show policy-map rd-policy class rd-class
Policy Map rd-policy
class rd-class
set phb 3
Console#
show policy-map
interface
This command displays the service policy assigned to the specified interface.
Syntax
show policy-map interface interface input
interface
unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
Command Mode
Privileged Exec
Example
Console#show policy-map interface 1/5 input
Service-policy rd-policy
Console#
To Next Page
Loading...
