Edge-Core ECS4120 Series

Chapter 18 | Address Table Commands
– 493 –
show mac-address-
table count
This command shows the number of MAC addresses used and the number of
available MAC addresses for the overall system or for an interface.
Syntax
show mac-address-table count interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table count interface ethernet 1/1
MAC Entries for Eth 1/1
Total Address Count :1
Static Address Count :0
Dynamic Address Count :1
Console#