Edge-Core ECS4120 Series

Chapter 29 | DHCP Commands
DHCP Relay Option 82
– 847 –
Example
Console#show ip dhcp relay
L2 relay: enabled.
Status of DHCP relay information:
Insertion of relay information: disabled.
DHCP option policy: drop.
DHCP relay-server address: 0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
DHCP sub-option format: extra subtype included
DHCP relay is configured on the following VLANs:
1-4094
Interface Information Option Status
---------- --------------------------
Eth 1/1 Enabled
Eth 1/2 Enabled
Eth 1/3 Enabled
Eth 1/4 Enabled
Eth 1/5 Enabled
,,,
Console#
Related Commands
ip dhcp relay server (842)