Chapter 24
| Multicast Filtering Commands
MVR for IPv4
– 711 –
clear mvr groups
dynamic
This command clears multicast group information dynamically learned through
MVR.
Syntax
clear mvr groups dynamic
Command Mode
Privileged Exec
Command Usage
This command only clears entries learned though MVR. Statically configured
multicast address are not cleared.
Example
Console#clear mvr groups dynamic
Console#
clear mvr statistics This command clears MVR statistics.
Syntax
clear mvr statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-26)
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
Example
Console#clear mvr statistics
Console#
To Next Page
Loading...
Need help?
General