Edge-Core ECS4120 Series

Chapter 10 | Access Control Lists
ARP ACLs
– 380 –
Example
This rule permits packets from any source IP and MAC address to the destination
subnet address 192.168.0.0.
Console(config-arp-acl)#$permit response ip any 192.168.0.0 255.255.0.0 mac
any any
Console(config-mac-acl)#
Related Commands
access-list arp (378)
show access-list arp This command displays the rules for configured ARP ACLs.
Syntax
show access-list arp [acl-name]
acl-name – Name of the ACL. (Maximum length: 32 characters)
Command Mode
Privileged Exec
Example
Console#show access-list arp
ARP access-list factory:
permit response ip any 192.168.0.0 255.255.0.0 mac any any
Console#
Related Commands
permit, deny (379)
show arp access-list This command displays the rules for configured ARP ACLs.
Syntax
show arp access-list [acl-name]
acl-name – Name of the ACL. (Maximum length: 32 characters)
Command Mode
Privileged Exec
Example
Console#show arp access-list
ARP access-list factory:
permit response ip any 192.168.0.0 255.255.0.0 mac any any
Console#