ELTEX ESR-3100 - Page 309

ESR series service routers.ESR-Series. User manual
309
•
•
•
•
•
•
•
•
•
•
•
•
Step Description Command Keys
32 Set the interval between LSP
transmissions on the
Broadcast network (optional).
esr(config-if-gi)# isis lsp-
interval <TIME> [<LEVEL>]
<TIME> – time in milliseconds, takes values
of [1-10000];
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level
2.
33 Set the LSP re-distribution
interval in the PtP network
(optional).
esr(config-if-gi)# isis lsp-
retransmit-interval <TIME>
[<LEVEL>]
<TIME> – time in seconds, takes values of
[1..65535];
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level
2.
34 Set the authentication
algorithm for the hello packets
(optional).
esr(config-if-gi)# isis
authentication algorithm
<ALGORITHM> [<LEVEL>]
<ALGORITHM> – authentication algorithm:
cleartext – unencrypted password;
md5 – password is hashed by md5
algorithm;
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level
2.
35 Set the password for hello
packet authentication
(optional).
esr(config-if-gi)# isis
authentication key ascii-text
{ <CLEAR-TEXT> | encrypted
<ENCRYPTED-TEXT> }
[<LEVEL>]
<CLEAR-TEXT> – password, set by the
string of 8 characters;
<ENCRYPTED-TEXT> – encrypted
password of 8 bytes (16 characters) in
hexadecimal format (0xYYYY ...) or
(YYYY ...);
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level
2.
36 Set the key list for hello
packet authentication
(optional).
esr(config-if-gi)# isis
authentication key chain
<KEYCHAIN> [<LEVEL>]
<KEYCHAIN> – key list identifier, set by the
string of up to 16 characters;
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level
2.