ELTEX ESR-3100 - Page 532

ESR series service routers.ESR-Series. User manual
532
Additionally, the following protocols must be allowed in the security zone-pair trusted self:
master(config)# security zone-pair trusted self
master(config-zone-pair)# rule 66
master(config-zone-pair-rule)# action permit
master(config-zone-pair-rule)# match protocol vrrp
master(config-zone-pair-rule)# enable
master(config-zone-pair-rule)# exit
master(config-zone-pair)# rule 67
master(config-zone-pair-rule)# action permit
master(config-zone-pair-rule)# match protocol udp
master(config-zone-pair-rule)# match destination-port failover
master(config-zone-pair-rule)# enable
master(config-zone-pair-rule)# exit
master(config-zone-pair)# exit
View the status of VRRP processes using the following command:
master# show vrrp
Virtual router Virtual IP Priority Preemption State
-------------- --------------------------------- -------- ---------- ------
1 192.0.2.1/24 20 Enabled Master
3 198.51.100.1/24 20 Enabled Master
View the status of Firewall session reservations using the following command
master# show ip firewall failover
Communication interface: gigabitethernet 1/0/2
Status: Running
Bytes sent: 2496
Bytes received: 640
Packets sent: 271
Packets received: 40
Send errors: 0
Receive errors: 0
View the status of device redundancy systems using the following command:
master# show high-availability state
AP Tunnels:
State: Disabled
Last state change: --
DHCP server:
State: Disabled
Last state change: --
Firewall sessions:
State: successful synchronization
Last synchronization: 09:38:00 05.08.2021