ELTEX ESR-3100 - Page 599

ESR series service routers.ESR-Series. User manual
599
•
•
•
•
•
•
•
Step Description Command Keys
7 Set the value of SNMP value that
contains the information on the
device location.
esr(config)# snmp-server location
<LOCATION>
<LOCATION> – information about
equipment location, set by the
string up to 255 characters.
8 Specify user access level via
SNMPv3.
esr(config-snmp-user)# access
<TYPE>
<TYPE> – access level:
ro – read-only access;
rw – read and write access.
9 Specify user security mode via
SNMPv3.
esr(config-snmp-user)#
authentication access <TYPE>
<TYPE> – security mode:
auth – used only for
authentication;
priv – both authentication
and data encryption are
used.
10 Specify SNMPv3 queries
authentication algorithm.
esr(config-snmp-user)#
authentication algorithm
<ALGORITHM>
<ALGORITHM> – encryption
algorithm:
md5 – password is hashed
by md5 algorithm;
sha1 – password is
encrypted by sha1
algorithm.
11 Set the password for SNMPv3
queries authentication.
esr(config-snmp-user)#
authentication key ascii-text
{ <CLEAR-TEXT> | encrypted
<ENCRYPTED-TEXT> }
<CLEAR-TEXT> – password, set by
the string of 8 to 16 characters;
encrypted – when
specifying a command, an
encrypted password is set:
<ENCRYPTED-TEXT> – encrypted
password of 8 to 16 bytes (from 16
to 32 characters) in hexadecimal
format (0xYYYY ...) or (YYYY ...).
12 Enable filtration and set the
profile of IP addresses from
which SNMPv3 packets with the
given SNMPv3 user name can be
received.
esr(config-snmp-user)# client-list
<NAME>
<NAME> – name of the previously
conscious object-group, specified
in a string of up to 31 characters.
13 Specify vrf for SNMPv3 user
(optional).
esr-21(config-snmp-user)# ip vrf
forwarding <VRF>
<VRF> – VRF instance name, set
by the string of up to 31
characters, which contains SNMP
notification collector.
14 Enable filtration and set IPv4/
IPv6 address which is provided
with the access to the router as
the given SNMPv3 user.
esr(config-snmp-user)# ip address
<ADDR>
<ADDR> – IP address of the client
provided with the access, defined
as AAA.BBB.CCC.DDD where each
part takes values of [0..255].