ESR series service routers.ESR-Series. User manual
Configure SIP proxy server address (use an embedded SIP server as SIP proxy server):
esr(config-voip-sip-proxy)# ip address proxy-server 192.0.2.5
Configure a SIP proxy server port:
esr(config-voip-sip-proxy)# ip port proxy-server 5080
If standard 5060 port is used, there is no need to specify it.
If it is necessary to use the registration, perform the following steps:
Configure registration server address (use an embedded SIP server as registration server):
esr(config-voip-sip-proxy)# ip address registration-server 192.0.2.5
Configure a registration server port:
esr(config-voip-sip-proxy)# ip port registration-server 5080
If standard 5060 port is used, you do not need to specify it.
Enable registration:
esr(config-voip-sip-proxy)# registration
Enable proxy server and registration server:
esr(config-voip-sip-proxy)# enable
This completes the configuration of SIP proxy server and registration server:
esr(config-voip-sip-proxy)# exit
The next step is to continue SIP profile configuration.
Configure a SIP domain:
esr(config-sip-profile)# sip-domain address sipdomain.com
If it is necessary to use SIP Domain for the registration, use the following command:
esr(config-sip-profile)# sip-domain registration enable
To Next Page
Loading...