Epson Stylus COLOR 3000

EPSON Stylus COLOR 3000
EPSON Stylus Color 3000 Service Manual
5
-7
3. Printing is abnormal.
START
NO
END
END
YES
YES
NO
NO
Run a self-test.
Does the
self-test print?
Repeat the cleaning
sequence or perform an
initial ink charge operation.
Is the problem
corrected?
Proceed to Section 5.5,
Printer Mechanism Repair.
Check the motors and
printheads. If they are
normal, replace the main
control board.
Is the problem
corrected?
Is the problem
corrected?
Are all
connector
cables connected to
the main board
properly?
Make adjustments.
(Refer to Chapter 4.)
Connect them properly.
YES
YES
NO
NO
NO
YES
YES
Is the
printout
abnormal?
Figure 5-4. Flowchart (3)