3.8
Fax Function/External Connection Function
Check (Epson Artisan 800/Epson Stylus Photo
PX800FW/TX800FW only)
3.8.1
Outline
Fax function/External connection (EXT port) function must be checked in addition to
usual printing/scanning function after repairing/refurbishing the defective units. The
following table describes each check method. Select an applicable Fax Function check
method in your repair center and implement this operation.
Table 3-36. Fax Function/EXT port Function check
3.8.2
Fax Function and External Connection Function Check
The following shows the detailed check condition/procedure of each method.
3.8.2.1
Fax Function Check by [Method A] and External
Connection Function Check
SETTING METHOD
*Regarding FAX number, refer
to
the
telephone
line
simulator
’
s
manual.
*Repaired/refurbished Epson Artisan 800/Epson
Stylus Photo PX800FW/TX800FW is
represented by “ R” unit from this.
*Select default setting to “ R” unit before this
check referring to the following table.
Table 3-37. Default Settings of Repaired
Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW (“ R” )
Note *1 : In case of these methods, you have to use telephone line simulator for checking fax
function. For your reference, web site address of the simulator is outlined below.
(as of August 2007)
http://www.telephonetribute.com/telco_line_simulators.html
http://www.skutchelectronics.com/sims.htm
*2 : You have to check this test whether you select any check method above.
Note * : This default setting is applied for [Condition B] and [Condition C].
1.
Check if you can hear ringing tone from
telephone before receiving fax. In this case,
the telephone sounds ringing.
2.
Check
if
you
can
’
t
hear
dial
tone
from
the
telephone during receiving fax data. In this
case,
the
telephone
doesn
’
t
sound
dial
tone.