405.1200.037.2 - Rel.: 2.21 of 25/02/2008
23-17
Use the arrow for any variation (see “Chapter 37 -> Operation of
terminal with touch screen“
).
To set the clock touch the words SET CLOCK on the display; the
following mask appears
For the clock to be used properly, a special battery has to be
inserted in the terminal (see
“Chapter 34 -> Video terminal
accessories“
).
Use the arrow for any variation (see
“Chapter 37 -> Operation of
terminal with touch screen“
).
Prepare the VT to receive the program:
To prepare the VT to receive the program, while displaying the
driver information page (see Page 23-15), press , and you will
see the following mask
hh:mm:ss dd/mm/yy
ESC
TRAN
PAGE
VT565 TRANSFER PAGE
Graphic controller BOOT check : OK
Graphic controller RAM check : OK
Main BOOT and RAM check : WAIT
SELECT:
MSP ASP EXITMemoCARD
To Next Page
Loading...
