405.1200.037.2 - Rel.: 2.21 of 25/02/2008
5-5
Command: Show alarms history
●
Command: Show page directory
Command: Show project information
●
Command: Show recipe directory
●
Command: Show sequence directory
●
Command: Shows driver status page
Command: Shows page help
Command: Shows page with function: PG
Command: Stops reading time sampled trend
Command: Trend reading saved in device
Command: Zero number of general pages
●
Date field
●
Day-of-the-week field
●
Dynamic texts: Bit-group-structured dynamic texts
1024*
●
Dynamic texts: Single-bit dynamic texts
●
Dynamic texts: Value-structured dynamic texts
●
E-keys
Equations
32
●
F-keys
●
Free terminal
Function: Disables key
●
Function: Go to page
Function: Internal command
●
Function: Invert bit value
●
Function: Macro
●
Function: None
●
Function: Reset bit permanently
●
Function: Reset real-time bit
●
Function: Sequences
●
Function: Sets bit permanently
●
Function: Sets real-time bit
●
Function: Value-structure direct command
●
Global configuration of E-keys
Global configuration of F-keys
●
Headers and footers (Total/Number of fields per H-F)
64/128
●
Info-messages (Total/active simultaneously)
256/256
●
Internal registers
4096bytes
●
Labels
●
LEDs assigned to sequence
Table 5.1: Functions and objects realizable with this VT (Part 2 of 4)
Code of terminal
VT130W
✳✳✳✳✳
Objects/Functions Quantity ▼
Unless otherwise stated, there is no limit to the number of includable elements, only the size of project memory sets a limit.
*) indicative value determined by the dimensions of the project, **) depends on memory available
To Next Page
Loading...
