Unpacking the BlackDiamond 8810 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
97
Figure 46: Removing contents from the upper BlackDiamond 8810 shipping carton
3 Release the clip locks as shown in Figure 47.
a Place your thumb and index finger inside the clip lock touching the prongs.
b Squeeze the prongs inward applying equal pressure on each side.
c Pull the prongs outward until the clip lock is released from the carton.
d Repeat steps 3a through 3c to release each of the remaining clip locks.
Figure 47: Clip locks on the BlackDiamond 8810 shipping carton
4 Lift the BlackDiamond 8810 shipping carton up and off the chassis.
5 Remove all four restraining bolts that hold the BlackDiamond 8810 chassis to the four shipping
brackets on the shipping pallet (see Figure 48).
ASP024
EX_087B
Clip lock
Open
lock
Squeeze prongs
to unlock
To Next Page
Loading...
