Installing the BlackDiamond 8810 Chassis
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
98
Figure 48: Restraining bolts holding the BlackDiamond 8810 chassis onto the wood pallet
6 With a person on each side of the chassis, place one hand in the empty power supply bay and the
other hand in the recessed hand-hold on the back panel of the BlackDiamond 8810 chassis (see
Figure 49).
Do not use the fan tray handle to lift or maneuver the BlackDiamond 8810 chassis. This handle is not designed to
support the weight of the chassis.
The BlackDiamond 8810 chassis should be empty before being lifted. This will also prevent damage to the system
components due to possible chassis flex when lifting.
7 Carefully lift the BlackDiamond 8810 chassis off the shipping pallet and onto the floor as shown in
Figure 49.
ASP016B
Lift box
off
chassis
Remove 4 bolts
holding chassis
to pallet
To Next Page
Loading...
