Foundry Networks FESX User Manual

Configuring IP Multicast Protocols
December 2005 © Foundry Networks, Inc. 19 - 49
Notification Message Error Code
Received
If the MSDP router receives a NOTIFICATION messages from the
neighbor, the message contains an error code corresponding to one
of the following errors. Some errors have subcodes that clarify the
reason for the error. Where applicable, the subcode messages are
listed underneath the error code messages.
• 1 – Message Header Error
• 2 – SA-Request Error
• 3 – SA-Message/SA-Response Error
• 4 – Hold Timer Expired
• 5 – Finite State Machine Error
• 6 – Notification
•7 – Cease
For information about these error codes, see section 17 in the Internet
draft describing MSDP, “draft-ietf-msdp-spec”.
Notification Message Error SubCode
Received
See above.
Notification Message Error Code
Transmitted
The error message corresponding to the error code in the
NOTIFICATION message this MSDP router sent to the neighbor. See
the description for the Notification Message Error Code Received field
for a list of possible codes.
Notification Message Error SubCode
Transmitted
See above.
TCP Statistics
Table 19.3: MSDP Peer Information (Continued)
This Field... Displays...

Foundry Networks FESX Specifications

General

Brand	Foundry Networks
Model	FESX
Category	Switch
Language	English