Configuring Basic Software Features
December 2005 © Foundry Networks, Inc. 3 - 19
The following example shows the message that appears when the port does not have a configured voice VLAN.
To view the voice VLAN for all ports, use the show voice-vlan command. The following example shows the
command output results.
Syntax: show voice-vlan [<port-num>]
FESX424 Switch(config)# show voice-vlan ethernet 2
Voice vlan is not configured for port 2.
FESX424 Switch(config)# show voice-vlan
Port ID Voice-vlan
2 1001
8 150
15 200
To Next Page
Loading...
