Configuring BGP4
December 2005 © Foundry Networks, Inc. 21 - 77
Multihop-EBGP Whether this option is enabled for the neighbor.
RouteReflectorClient Whether this option is enabled for the neighbor.
SendCommunity Whether this option is enabled for the neighbor.
NextHopSelf Whether this option is enabled for the neighbor.
DefaultOriginate Whether this option is enabled for the neighbor.
MaximumPrefixLimit Lists the maximum number of prefixes the Layer 3 Switch will accept
from this neighbor.
RemovePrivateAs Whether this option is enabled for the neighbor.
RefreshCapability Whether this Layer 3 Switch has received confirmation from the
neighbor that the neighbor supports the dynamic refresh capability.
CooperativeFilteringCapability Whether the neighbor is enabled for cooperative route filtering.
Distribute-list Lists the distribute list parameters, if configured.
Filter-list Lists the filter list parameters, if configured.
Prefix-list Lists the prefix list parameters, if configured.
Route-map Lists the route map parameters, if configured.
Messages Sent The number of messages this router has sent to the neighbor. The
display shows statistics for the following message types:
•Open
• Update
• KeepAlive
• Notification
• Refresh-Req
Messages Received The number of messages this router has received from the neighbor.
The message types are the same as for the Message Sent field.
Last Update Time Lists the last time updates were sent and received for the following:
•NLRIs
• Withdraws
Table 21.7: BGP4 Neighbor Information (Continued)
This Field... Displays...
To Next Page
Loading...
