Foundry Configuration Guide for the FESX, FSX, and FWSX
21 - 92 © Foundry Networks, Inc. December 2005
LocPrf The degree of preference for this route relative to other routes in the
local AS. When the BGP4 algorithm compares routes on the basis of
local preferences, the route with the higher local preference is chosen.
The preference can have a value from 0 – 4294967295.
Weight The value that this router associates with routes from a specific
neighbor. For example, if the router receives routes to the same
destination from two BGP4 neighbors, the router prefers the route
from the neighbor with the larger weight.
Path The route’s AS path.
Note: This field appears only if you do not enter the route option.
Origin code A character the display uses to indicate the route’s origin. The origin
code appears to the right of the AS path (Path field). The origin codes
are described in the command’s output.
Note: This field appears only if you do not enter the route option.
Table 21.10: BGP4 Network Information (Continued)
This Field... Displays...
To Next Page
Loading...
Need help?
General
