Foundry Networks FESX User Manual

Configuring Basic Layer 2 Features
December 2005 © Foundry Networks, Inc. 4 - 13
The [input | output] parameters apply to the FESX, FSX, and FWSX devices only. This parameter configures the
mirror port exclusively for ingress or egress traffic. If you do not specify one, both types of traffic apply.
The both | in | out parameters specify the traffic direction you want to monitor on the mirror port. There is no
default.
To display the port monitoring configuration, enter the show monitor and show mirror commands.

Foundry Networks FESX Specifications

General

Brand	Foundry Networks
Model	FESX
Category	Switch
Language	English