Foundry Configuration Guide for the FESX, FSX, and FWSX
A - 12 © Foundry Networks, Inc. December 2005
Alert Management module at slot <slot-num>
state changed from <module-state> to
<module-state>.
Indicates a state change in a management
module.
The <slot-num> indicates the chassis slot
containing the module.
The <module-state> can be one of the
following:
• active
•standby
•crashed
• coming-up
• unknown
Alert OSPF LSA Overflow, LSA Type =
<lsa-type>
Indicates an LSA database overflow.
The <lsa-type> parameter indicates the type
of LSA that experienced the overflow
condition. The LSA type is one of the
following:
• 1 – Router
• 2 – Network
•3 – Summary
•4 – Summary
• 5 – External
Alert OSPF Memory Overflow OSPF has run out of memory.
Alert Power supply <num>, <location>, failed A power supply has failed.
The <num> is the power supply number.
The <location> describes where the failed
power supply is in the chassis.
Alert Temperature <degrees> C degrees, warning
level <warn-degrees> C degrees, shutdown
level <shutdown-degrees> C degrees
Indicates an overtemperature condition on
the active module.
The <degrees> value indicates the
temperature of the module.
The <warn-degrees> value is the warning
threshold temperature configured for the
module.
The <shutdown-degrees> value is the
shutdown temperature configured for the
module.
Table A.3: Foundry Syslog Messages (Continued)
Message Level Message Explanation
To Next Page
Loading...
