Foundry Networks FESX - Page 753

Using Syslog
December 2005 © Foundry Networks, Inc. A - 27
Notification OSPF originate LSA, rid <router-id>,
area <area-id>, LSA type <lsa-type>,
LSA id <lsa-id>,
LSA router id <lsa-router-id>
An OSPF interface has originated an LSA.
The <router-id> is the router ID of the
Foundry device.
The <area-id> is the OSPF area.
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF virtual intf authen failure,
rid <router-id>, intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
error type <error-type>, pkt type <pkt-type>
Indicates that an OSPF virtual routing
interface authentication failure has occurred.
The <router-id> is the router ID of the
Foundry device.
The <ip-addr> is the IP address of the
interface on the Foundry device.
The <src-ip-addr> is the IP address of the
interface from which the Foundry device
received the authentication failure.
The <error-type> can be one of the following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The <packet-type> can be one of the
following:
•hello
• database description
• link state request
• link state update
• link state ack
• unknown
Table A.3: Foundry Syslog Messages (Continued)
Message Level Message Explanation