Foundry Configuration Guide for the FESX, FSX, and FWSX
D - 6 © Foundry Networks, Inc. December 2005
NOTE: Full Layer 3 features are supported on Premium devices only.
IGMP V1 and V2
• FESX support starts in release 02.0.00.
XX
IP
• FESX support starts in release 02.0.00.
XX
IP multicast (DVMRP, PIM-SM, PIM-DM)
• FESX support starts in release 02.0.00.
• Layer 3 Switches support up to 1024 PIM groups and 1024 DVMRP
groups by default.
XX
OSPF
• FESX support starts in release 02.0.00.
XX
RIP V1 and V2
• FESX support starts in release 02.0.00.
XX
Route-only support
• FSX devices support disabling Layer 2 Switching at the CLI Interface
level as well as the Global CONFIG level.
• FESX support starts in release 02.0.00. Release 02.0.00 supports
disabling Layer 2 Switching on a global basis only. Release 02.1.01
supports disabling Layer 2 Switching on an individual interface and on
a global basis.
XX
VRRP and VRRPE
• FESX support starts in release 02.0.00.
XX
Table D.2: List of Supported Features (Continued)
Category, Description, and Configuration Notes
Supported on
FSX FESX FWSX
To Next Page
Loading...
Need help?
General
