EasyManuals Logo

Foundry Networks Switch and Router User Manual

Default Icon
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1010 background imageLoading...
Page #1010 background image
Foundry Switch and Router Installation and Configuration Guide
C - 6 December 2000
Quality-of-Service Policies
Foundry devices support Quality-of-Service (QoS) through implementation of 802.1q prioritization. You can
configure QoS policies for packets associated with the following items:
Ports
VLANs
Static MAC entries
Layer 4 sessions
AppleTalk sockets.
The QoS levels provided by a Foundry device differ depending on the device:
The Chassis devices (NetIron Internet Backbone router, BigIron, FastIron II, and chassis-based ServerIron)
and the TurboIron/8 provide four weighted queues: 0 (normal) 3 (highest priority).
The Stackable devices (FastIron Workgroup, FastIron Backbone, TurboIron
1
, NetIron, and stackable
ServerIron) provide two QoS queues: normal and high.
NOTE: The ServerIron also provides a cache QoS queue. This queue applies only to Transparent Cache
Switching (TCS) and enables the feature.
The default queue for all packets is normal (or 0). You can change QoS policy by placing a port, VLAN, static
MAC entry, Layer 4 session, or AppleTalk socket into a higher queue. See IronClad Quality of Service (QoS) on
page 11-1 for more information about the Foundry QoS algorithms.
Actions
QoS policies place packets in the specified queue for forwarding.
Scope
You can apply QoS policies to individual ports, VLANs, static MAC address, Layer 4 sessions, and AppleTalk
sockets. If a port is a member of two or more of these items and has different priorities, the priorities are merged.
However, the resulting priority is never lower than the highest priority.
Cache Server redirection policies either redirect
HTTP packets to cache servers or send the
packets to the Internet
Note: This type of policy applies only to the
ServerIron Transparent Cache Switching (TCS)
feature.
XC-22
a. Router acceleration is supported only on the FastIron Backbone and TurboIron Backbone Layer 2
Switches.
1.4- to 6-port Gigabit Layer 2 Switch
Table C.3: Foundry Policies (Continued)
Policy Type Supported on... See page...
Router Switch ServerIron

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foundry Networks Switch and Router and is the answer not in the manual?

Foundry Networks Switch and Router Specifications

General IconGeneral
BrandFoundry Networks
ModelSwitch and Router
CategorySwitch
LanguageEnglish

Related product manuals