Foundry Networks Switch and Router User Manual

Foundry Switch and Router Installation and Configuration Guide
19 - 78 December 2000
19. Click on the checkbox next to Address Filter to indicate that you are using an address filter as a match
condition.
20. Enter the address filter number in the Address Filter field.
21. Click Apply to apply the changes to the device’s running-config file.
22. Select the Route Map Set
link at the bottom of the panel to display the BGP Route Map Set panel, as shown
in the following example.

Foundry Networks Switch and Router Specifications

General

Brand	Foundry Networks
Model	Switch and Router
Category	Switch
Language	English