206
"Engage the wire" screen
Follow the instructions given in the
"Engage the wire" screen
Press F2 "Done":
– VR alignment is restarted, the 5th
screen in the wizard appears
("Alignment under load")
"Alignment under load" screen
Once VR alignment is complete, the 6th
screen in the wizard appears "Confirmati-
on".
"Confirmation" screen
Press F2 "Done":
CAUTION! Risk of injury from wire
electrode emerging at speed. Hold
the welding torch so that it points
away from your face and body.
8
9
10
To Next Page
Loading...