55
EN
"Optimize characteristic" screen: setting power values
Select the lower and upper power li-
mits using down (6) or up (7) keys
Set lower and upper power limit using
the adjusting dial (18)
– The parameter value can only be
altered within the defined setting
range. The setting range is high-
lighted.
– The values displayed in the dis-
play area for current, voltage and
sheet thickness depend directly
on the power values entered.
"Optimize characteristic" screen: Selecting the syner-
gic line
Press F2 "Forward":
– The 2nd screen in the wizard ap-
pears ("Optimize characteristic")
Select corresponding characteristic
using the adjusting dial (18)
– If an existing characteristic is to be
overwritten, a precautionary query
appears.
Precautionary query for overwriting the characteristic
Press F3 "Name characteristic" to
name the characteristic:
– "Name characteristic" screen ap-
pears
3
4
5
6
7
To Next Page
Loading...