56
"Name characteristic" screen
Select corresponding characters using
the adjusting dial (18)
Press F4 ">" to enter the next charac-
ter
– Corrections can be carried out
using F3 "<" or F2 "< Delete"
Press F1 "Accept" when finished:
– The new name is accepted, "Opti-
mize characteristics" screen ap-
pears
"Optimize characteristic" screen: Selecting the syner-
gic line
Press F2 "Forward":
– The 3rd screen in the wizard ap-
pears as confirmation ("Optimize
characteristic")
– By pressing F1 "Back", the
screens of the steps already per-
formed can be displayed again.
Changes can be made.
"Optimize characteristic" wizard: confirmation of opti-
mised characteristic
Press F2 "Done":
– The last "Data" screen displayed
appears.
8
9
10
11
12
To Next Page
