58
Precautionary query: characteristic point does not
match
Press F2 "Yes" or F3 "No" or F4 "Can-
cel"
– If a standard characteristic point is
to be added to a pulse characteri-
stic or vice versa, an error messa-
ge appears.
Error message: characteristic point cannot be saved
Press F3 "OK"
– The 1st screen in the wizard appe-
ars ("Create new characteristic
point")
"Create new characteristic point" screen: No. 7 - <
Empty characteristic > selected
Select another characteristic using the
adjusting dial (18)
Press F3 "Name characteristic" to
name the characteristic:
– "Name characteristic" screen ap-
pears
5
6
7
8
To Next Page
Loading...