83
EN
Example: AlSi 5 / 1.2 mm / I1 100% Ar screen "Select
a reference": Characteristic S0016 selected
Select the corresponding process
using the down (6) or up (7) keys
Select the corresponding characteri-
stic reference number using the adjus-
ting dial (18)
– E.g.:
Characteristic C0876 is only suita-
ble for CMT.
Press F2 "Forward"
– The 4th screen in the wizard
("Welding program") is shown as a
confirmation
– By pressing F1 "Back", the
screens of the steps already per-
formed can be displayed again.
Changes can be made.
Optimizing & managing jobs: "Welding program"
screen
Press F2 "Done"
Optimizing & managing jobs: "Welding program"
screen
The set welding program is accepted, "Wel-
ding program" screen appears
9
10
11
12
To Next Page
