© 2011 Fujitsu Technology Solutions
118
9.2.6.8 Viewing Event Log
Use this panel to display the event log, which is used to hold error messages for catastrophic events.
After the event is logged and the updated log is saved in FLASH memory, the switch will be reset. The
log can hold at least 10080 entries (the actual number depends on the platform and OS), and is erased
when an attempt is made to add an entry after it is full. The event log is preserved across system resets.
Figure : Viewing Event Log
Non-Configurable Data
Entry - The number of the entry within the event log. The most recent entry is first.
Filename - The source code filename identifying the code that detected the event.
Line - The line number within the source file of the code that detected the event.
Task ID - The OS-assigned ID of the task reporting the event.
Code - The event code passed to the event log handler by the code reporting the event.
Time - The time the event occurred, measured from the previous reset.
Command Buttons
Refresh - Refresh the page with the latest log entries.
Clear Log - Clear all entries in the log.
To Next Page
Loading...
