© 2011 Fujitsu Technology Solutions
192
Configurable Data
VLAN ID - Specify the VLAN Identifier for the new VLAN. (You can only enter data in this field when
you are creating a new VLAN.) The range of the VLAN ID is (1 to 4094) .
VLAN Name - Use this optional field to specify a name for the VLAN. It can be up to 32
alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 always has a name
of 'Default'.
VLAN Type - This field identifies the type of the VLAN you are configuring. You cannot change the
type of the default VLAN (VLAN ID = 1): it is always type 'Default'. When you create a VLAN, using
this screen, its type will always be 'Static'. A VLAN that is created by GVRP registration initially has a
type of 'Dynamic'. You may use this pull down menu to change its type to 'Static'.
Non-Configurable Data
Unit/Slot/Port - Indicates which port is associated with the fields on this line.
Status - Indicates the current value of the participation parameter for the port.
Command Buttons
Apply - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete - Delete this VLAN. You are not allowed to delete the default VLAN.
To Next Page
Loading...
