© 2011 Fujitsu Technology Solutions
236
9.3.15.2 Status
Use this panel to display information about entries in the L2Mcast Static/Dynamic Groups. These entries
are used by the transparent bridging function to determine how to forward a received frame.
Figure : MLD Snooping Multicast Static Groups Status
Non-Configurable Data
VLAN - L2Mcast Group's VLAN ID value.
MAC Address - A mulitcast MAC address for which the switch has forwarding information. The
format is a six byte MAC address. For example: 33:33:00:00:11:11.
Unit/Slot/Port(s) - The interface number belongs to this Multicast Group.
Active State - The active interface number belongs to this Multicast Group.
Command Buttons
Refresh - Refetch the database and display it again starting with the first entry in the table.
To Next Page
Loading...
