Fujitsu PRIMERGY BX900 - Page 278

© 2011 Fujitsu Technology Solutions
276
Command Buttons
Refresh - Update the information on the page.
9.4.1.4 Port Summary
Figure : Port Access Control Port Summary
Non-Configurable Data
Port - Specifies the port whose settings are displayed in the current table row.
Control Mode - This field indicates the configured control mode for the port. Possible values are:
• Force Unauthorized: The authenticator port access entity (PAE) unconditionally sets the
controlled port to unauthorized
• Force Authorized: The authenticator PAE unconditionally sets the controlled port to
authorized.
• Auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator, and the authentication
server.
Operating Control Mode - This field indicates the control mode under which the port is actually
operating. Possible values are:
• ForceUnauthorized
• ForceAuthorized
• Auto
• N/A: If the port is in detached state it cannot participate in port access control.