© 2011 Fujitsu Technology Solutions
283
9.4.2.2 Interface Config
Figure : Port Security Interface Config
Selection Criteria
Unit/Slot/Port - Selects the interface to be configured.
Port Security - Enables or disables the Port Security feature for the selected interface.
Enable violation traps - Enables or disables the sending of new violation traps designating when a
packet with a disallowed MAC address is received on a locked port.
Enable Violation Shutdown - Enables or disables the Port Security Violation Shutdown mode for
the selected interface.
Configurable Data
Maximum Number of Dynamically Learned MAC Addresses Allowed - Sets the maximum
number of dynamically learned MAC addresses on the selected interface.
Add a static MAC address - Adds a MAC address to the list of statically locked MAC addresses for
the selected interface.
VLAN ID - Adds a corresponding VLAN ID for the MAC Address being added to the list of statically
locked MAC addresses for the selected interface.
Maximum Number of Statically Locked MAC Addresses Allowed - Sets the maximum number of
statically locked MAC addresses on the selected interface.
Command Buttons
Clear - Clears the Dynamic MAC addresses of the selected interface.
To Next Page
Loading...
