© 2011 Fujitsu Technology Solutions
28
Default Gateway for management ports
Only one default gateway is supported in the system. User could assign the default gateway for in-band
management or out-of-band management interface, but not simultaneously. If the gateway for the in-band
management is set it is only valid for the in-band management. If the user tries to set also the gateway
for the out-of-band management there will be an error message saying that the gateway for the in-band
management is already set and it is therefore not allowed to configure a second one. If the gateway for
the out-of-band management is set it is only valid for the out-of-band management. Again an appropriate
error message will be shown if it is tried to configure the in-band management gateway.
If user configure one of these two management ports to get the IP address from DHCP server, the
default gateway got from DHCP server will be overridden the existed one. That is, the default gateway
will always be valid for the management port which is configured to use DHCP if the IP and default
gateway are assigned by DHCP server successfully.
To Next Page
Loading...
