Fujitsu PRIMERGY BX900 - Page 380

© 2011 Fujitsu Technology Solutions
378
GMRP Learned - The value of the corresponding instance was learned via GMRP and applies to
Multicast.
Other - The value of the corresponding instance does not fall into one of the other categories.
10.4.2.2 show mac-addr-table count
This command displays the total forwarding database entries, the number of static and learnning MAC
address, and the max address available on the switch.
Syntax
show mac-addr-table count
Default Setting
None
Command Mode
Privileged Exec
Display Message
Dynamic Address count: The total learning MAC addresses on the L2 MAC address Table.
Static Address (User-defined) count: The total user-defined addresses on the L2 MAC address
Table.
Total MAC Addresses in use: This number of addresses are used on the L2 MAC address table.
Total MAC Addresses available: The switch supports max value on the L2 MAC address table.