© 2011 Fujitsu Technology Solutions
386
10.4.2.11 mac-addr-table aging-time
This command configures the forwarding database address aging timeout in seconds.
Syntax
mac-addr-table aging-time <10-1000000>
no mac-addr-table aging-time <10-1000000>
<10-1000000> - aging-time (Range: 10-1000000) in seconds
no - This command sets the forwarding database address aging timeout to 300 seconds.
Default Setting
300 seconds for switch mode
14500 seconds for End-Host-Mode mode
Command Mode
Global Config
i
Aging Interval for End-Host-Mode is range from 0 to 1000000, 0 value means that address
is never aged. And the default interval is 14500.
To Next Page
Loading...
