Fujitsu PRIMERGY BX900 - Page 456

© 2011 Fujitsu Technology Solutions
454
10.4.8.1.3 show ipv6 mld snooping mrouter interface
The user can go to the CLI Privilege Mode to display information about statically configured multicast
router-attached interfaces, use the show ipv6 mld snooping mrouter interface Privilege command.
Syntax
show ipv6 mld snooping mrouter interface <slot/port>
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Interface: Shows the interface on which multicast router information is being displayed.
Multicast Router Attached: Indicates whether multicast router is statically enabled on the interface.
VLAN ID: Displays the list of VLANs of which the interface is a member.
10.4.8.1.4 show ipv6 mld snooping mrouter vlan
The user can go to the CLI Privilege Mode to display information about statically configured multicast
router-attached interfaces, use the show ipv6 mld snooping mrouter vlan Privilege command.
Syntax
show ipv6 mld snooping mrouter vlan <slot/port>
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
VLAN ID: Displays the list of VLANs of which the interface is a member.
Interface: Shows the interface on which multicast router information is being displayed.