Fujitsu PRIMERGY BX900 - Page 476

© 2011 Fujitsu Technology Solutions
474
10.4.10.5 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical slot
and port for a configured port-channel. The option all sets every configured port-channel with the same
administrative mode setting.
Syntax
port-channel linktrap {<slot/port> | all}
no port-channel linktrap {<slot/port> | all}
<slot/port> - Port-Channel Interface number.
all - all Port-Channel interfaces.
no - This command disables link trap notifications for the port-channel (LAG). The interface is a
logical slot and port for a configured port-channel. The option all sets every configured port-channel
with the same administrative mode setting.
Default Setting
Enabled
Command Mode
Global Config
10.4.10.6 port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot and port for a
configured port-channel, and name is an alphanumeric string up to 15 characters. This command is used
to modify the name that was associated with the port-channel when it was created.
Syntax
port-channel name {<slot/port> | all} <name>
<slot/port> - Port-Channel Interface number.
all - all Port-Channel interfaces.
<name> - Configured Port-Channel name (up to 15 characters).
Default Setting
None
Command Mode
Global Config