Fujitsu PRIMERGY BX900 - Page 491

© 2011 Fujitsu Technology Solutions
489
Syntax
errdisable recovery cause udld
no errdisable recovery cause udld
no - This command set the admin mode of error disable cause by udld to default.
Default Setting
Disable
Command Mode
Global Config
10.4.12.3 errdisable recovery interval
The command set error disable recovery timer interval.
Syntax
errdisable recovery interval <30-86400>
no errdisable recovery interval
no - This command set the error disable recovey interval to default.
Default Setting
300 seconds
Command Mode
Global Config