Fujitsu PRIMERGY BX900 - Page 526

© 2011 Fujitsu Technology Solutions
524
10.6.5.2 show snmp user
This command displays SNMP user information.
Syntax
show snmp user
Default Setting
None
Command Mode
Privileged Exec
Display Message
User Name: The user to which this entry grants access. A valid entry is a case-sensitive
alphanumeric string of up to 8 characters.
Authentication: Specify the SNMPv3 Authenticatiion Protocol setting for the selected user account.
Encryption: Specify the SNMPv3 Encryption Protocol setting for the selected user account.
10.6.5.3 show snmp engineID
This command displays SNMP engineID information.
Syntax
show snmp engineID
Default Setting
None
Command Mode
Privileged Exec
Display Message
Remote EngineID: Engine ID are up to 24 hexadecimal characters in length.
IP Address: IP address of SNMP host which will receive SNMP trap/inform from this switch.