Fujitsu PRIMERGY BX900 - Page 547

© 2011 Fujitsu Technology Solutions
545
10.6.8.5 ip http secure-port
This command is used to set the secure HTTP port where port can be 1-65535 and the default is port
443.
Syntax
ip http secure-port <portid>
no ip http secure-port
<portid> - secure HTTP Port value.
no - This command is used to reset the secure HTTP port to the default value.
Default Setting
443
Command Mode
Global Config
10.6.8.6 ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Syntax
ip http secure-server
no ip http secure-server
no - This command is used to disable the secure socket layer for secure HTTP.
Default Setting
Disabled
Command Mode
Global Config