Fujitsu PRIMERGY BX900 - Page 549

© 2011 Fujitsu Technology Solutions
547
10.6.8.9 ip http secure-session
This command is used to set secure http hard-timeout, maxsessions and soft-timeout parameters.
Syntax
ip http secure-session { hard-timeout <0-168> | maxsessions <0-16> | soft-timeout <0-60> }
no ip http secure-session { hard-timeout | maxsessions | soft-timeout }
hard-timeout <0-168>: Configure the hard timeout (in hours) for Secure HTTP sessions.
maxsessions <0-16>: Configure Maximum allowable number of Secure HTTP sessions.
soft-timeout <0-60>: Configure the soft timeout (in minutes) for Secure HTTP sessions.
no - This command sets the session parameters to default for Secure HTTP.
Default Setting
maxsessions: 16
hard-timeout: 24
soft-timeout: 5
Command Mode
Global Config