Fujitsu PRIMERGY BX900 - Page 577

© 2011 Fujitsu Technology Solutions
575
10.6.16.2 udld aggressive
This command enables global udld aggressive mode and will work on all fiber ports except where locally
configured.
Syntax
udld aggressive
no udld aggressive
no - This command is used to disable global udld aggressive mode
Default Setting
Disabled
Command Mode
Global Config
10.6.16.3 udld enable
This command enables global udld normal mode and will work on all fiber ports except where locally
configured.
Syntax
udld enable
no udld enable
no - This command is used to disable global udld normal mode
Default Setting
Disabled
Command Mode
Global Config