© 2011 Fujitsu Technology Solutions
602
10.7.3.1 show logging hosts
This command displays all configured logging hosts.
Syntax
show logging hosts
Default Setting
None
Command Mode
Privileged Exec
Display Message
Index (used for deleting)
IP Address/Hostname: IPv4/IPv6 address or Hostname of the configured server.
Type: Logging Host Address Type (ipv4, ipv6, dns or dnsv6).
Severity: The minimum severity to log to the specified address.
Port:This is the port on the local host from which syslog messages are sent.
Status: The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
To Next Page
Loading...
