Fujitsu PRIMERGY BX900 - Page 681

© 2011 Fujitsu Technology Solutions
679
10.12.2.2 enable secret
This command allow user to set specified privilege level password.
Syntax
enable secrect level <1-15> {0|7} <password>
no enable secrect level <1-15>
no – This command sets the specified privilege level password to none.
Default Setting
None
Command Mode
Global Config
10.12.2.3 enable
This command allow user to access specified privilege level.
Syntax
enable [<0-15>]
Note - If user want to access higher privilege level, it need to authentic specified password.
Default Setting
15
Command Mode
User Exec