Fujitsu PRIMERGY BX900 - Page 781

© 2011 Fujitsu Technology Solutions
779
10.18.2.6 no access-list
This command deletes an ACL that is identified by the parameter <accesslistnumber> from the system or
remove an ACL rule that is identified by the parameter <1-10> from the an IP ACL <accesslistnumber>.
Syntax
no access-list {<1-99> | <100-199>} [<rule-id>]
<rule-id> - To remove a Rule ID.
Note: The ACL number is an integer from 1 to 199. The range 1 to 99 is for the normal ACL List and 100 to 199 is
for the extended ACL List.
Default Setting
None
Command Mode
Global Config