© 2011 Fujitsu Technology Solutions
91
9.2.2.9 DDNS Config
Figure : DDNS Config
Selection Criteria
DDNS Host - Selects the DDNS Host for which data is to be displayed or configured. If the add item
is selected, a new DDNS Host can be configured.
Server Type - Selects the server type of DDNS server. You can choose any of the following type :
• EASYDNS
• DYNDNS
• DHS
• ODS
• DYNS
• ZONEEDIT
• TZO
Configurable Data
Host Name - The host name of DDNS server.
User Name - The user name for DDNS server.
Password - The optional new or changed password for the account. It will not display as it is typed,
only asterisks(*) will show. Passwords are up to 32 characters in length, and are case sensitive.
IP Address - The IP address is mapped with the "Host Name" that you set.
Server IP - If this option is selected, the IP Address will be set to In-Band Mgmt IP address.
Command Buttons
Apply - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
Remove - Remove the selected DDNS configuration.